Installation Procedure - Advantech PPC-L60T User Manual

5.1.2 Installation procedure

To mount the PPC-L60T into the Panel:
Panel Mount
(1) Panel Mount
1. There are seven holes located along the four sides of the Panel
PC.
2. Insert the screws from the front side into the holes and tighten
them with the nuts provided.(See Figure E.2 )
3. The screw size is M3*L
(2) Clamper Mount
1. There are four holes located along the four sides of the Panel
PC.
2. Insert the clamper from the four sides and tighten them with
the nuts provided.
3. The screw size is M4*12 mm
(See Figure5.3)
(L=wall thickness+5.0mm)