12.1″ panel pc with tft lcd and intel® core™ i / celeron® processor (7 pages)
Summary of Contents for Advantech PPC-L62T
Page 1
User Manual PPC-L62T Intel Atom Processor-Based Panel PC with 6.5” Color TFT LCD Display...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.
Page 5
Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive elec- tronic components. PPC-L62T User Manual...
System Setup ........5 A Quick Tour of the Panel PC ..............6 Figure 2.1 Front Panel of PPC-L62T ........... 6 Figure 2.2 Side View of the Panel PC ......... 6 Figure 2.3 I/O Peripheral Connectors Panel of DC Input Model.. 7 Figure 2.4 I/O Peripheral Connectors Panel of DC Input Model..
Page 8
Table 5.2: JP1: CMOS CLEAR & AT / ATX Select ....23 Table 5.3: CN16: Ring and Power for COM1 pin 9 ....23 5.1.3 Jumper and Connector Locations..........24 Figure 5.1 Jumpers & Connectors on PPC-L62T Motherboard. 24 5.1.4 Connectors ................. 25 Table 5.4: Connectors List ............25 Table 5.5: CN23: DC IN ............
1.1 Introduction Advantech PPC-L62T is an Intel Atom processor based Panel PC with a bright 6.5" LCD display. The powerful Atom CPU and Intel ICH8M chipsets bring the most dynamic applications to life without sacrifices to any industrial reliability. The Internal CFast card interface can serve as an alternate HDD solution for OS booting and the Mini PCIe interface can be used a wireless LAN card to extend device mobility.
Chapter System Setup This chapter gives system setup information for the PPC-L62T. Sections include: A Quick Tour Installation Procedures Running the BIOS Setup Installing System software...
When placed upright on the desktop, the front panel of the panel PC appears as shown in Figure 2.1. Figure 2.1 Front Panel of PPC-L62T When viewed from the left side of the panel PC, the CFast, holes for panel mount are visible, as shown in Figure 2.2.
Figure 2.4 I/O Peripheral Connectors Panel of DC Input Model A: DC Inlet B: RS-232 x 1 C: Line Out D: USB 2.0 x 2 E: 10/100/1000 Mbps Ethernet x 1 F: RS-232 x 1 G: RS-232/422/485 x 1 PPC-L62T User Manual...
2.3.2 Connecting the Keyboard and Mouse Connect the mouse and keyboard to the I/O section of PPC. If using a serial mouse and the panel PC has a touchscreen, it is possible to connect the mouse to any COM port. PPC-L62T User Manual...
Figure 2.6 Drivers and Utilities on the CD-ROM Note! The drivers and utilities used for the PPC-L62T panel PCs are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers util- ities.
Chapter Using the Panel PC This chapter explains onboard devices and peripheral I/O ports available on the PPC-L62T. Sections include: Serial COM Ports USB Ports Audio Interface Ethernet Touchscreen (Optional)
Refer to the manual(s) which accompanied any serial device(s) for instructions on configuring the operating environment to recognize the device(s). Run the BIOS setup program and configure the jumper settings to change the mode of the COM ports. Figure 3.1 I/O Ports PPC-L62T User Manual...
3.6 Touchscreen (Optional) The touchscreen is connected to the internal COM port. Its function is similar to that of a mouse. PPC-L62T supports resistive touchscreen. It is necessary to install the touchscreen driver before it will function. The touch- screen drivers for various operating systems are stored on the CD-ROM disc inside the accessory box.
4.2 Disassembling the Panel PC following are standard procedures for disassembling the panel PC before upgrading the system. All procedures are illustrated in Figure 4.1. Unfasten the screws securing the rear cover and remove it. Figure 4.1 Unfastening the Rear Cover PPC-L62T User Manual...
Remove the six screws on rear cover first. (See Figure 4.2) Figure 4.2 Unfastening the Rear Cover Place SATA HDD Cable & HDD rear cover connected to the HDD. (See Figure 4.3) Figure 4.3 SATA HDD Cable & HDD Rear Cover Connected to the HDD PPC-L62T User Manual...
The HDD module is mounted to the cover& the machine. (See Figure 4.4) Figure 4.4 Assembly HDD Module to Rear Cover Tighten rear cover 6 screws, the HDD module is mounted to the machine. (See Figure 4.5) Figure 4.5 HDD Module is Mounted to the Machine PPC-L62T User Manual...
2 GB of DDR3 SDRAM memory. The following instructions are for installing the DDR3 SDRAM Memory: Placing the memory card on the board end corresponding position. (See Figure 4.6) Figure 4.6 Placing the memory card on the board end PPC-L62T User Manual...
Remove the rubber plug (out of box on the top side). (See Figure 4.7) Figure 4.7 Out of box on the left side of the rubber plug Install the wireless LAN card and antenna. (See Figure 4.8) Figure 4.8 Install the wireless LAN card and antenna PPC-L62T User Manual...
Chapter Jumpers and Connectors This chapter gives information on setting jumpers and using the connectors on the PPC-L62T motherboard. Sections include: Setting Jumpers Jumpers Jumpers and Connectors Loca- tions Connectors...
5.1 Jumpers and Connectors This chapter supplies more detailed information about the internal jumper settings and an outline of the I/O ports available on the PPC-L62T. 5.1.1 Setting Jumpers The Panel PC can be configured to match the needs of each application by setting jumpers.
It also has LED indicator lights that display the system operation status. The table below lists the function of each jumper and LED. The motherboard of the PPC-L62T has a number of jumpers that allow you to configure your system to suit your applications.
Speak CN18 LAN2 CN19 LAN1 CN20 USB 6/7 CN21 USB 8/9 CN22 LIN OUT CN23 DC IN CN24 COM 2 CN25 COM 3 (Reserve) CN26 COM 1 CN27 CFAST Table 5.5: CN23: DC IN Pin Name DC_IN PPC-L62T User Manual...