Table of Contents
Advertisement
In case of failure or inadequate cleaning of the heater may have function problems such as:
• poor combustion
• blackening of the glass
• clogging of grate with accumulation of ash and pellets
• ash deposit and excessive deposits on the heat exchanger resulting in poor performance.
The check of electromechanical components must be performed only by qualified personnel with technical
knowledge of electricity and combustion.
Warnings for cleaning
All cleaning of all parts must be carried out with the stove
completely cold and the plug disconnected.
Before effecting any maintenance operation or cleaning on
the stove, take the following precautions:
• be sure that all parts of the stove are cold
• be sure that the ashes are completely cold;
• be sure that the general switch is in the "OFF" position;
• be sure that the plug is pulled out of the socket to avoid
accidental contact;
• Once the maintenance phase is completed check that
everything is in order as per before the intervention (the
brazier is placed correctly).
Follow
carefully
cleaning instructions. Failure to
follow these instructions could
create problems with the operation
of the thermostove.
94
Any kind of tampering or unauthorized substitution of non-
original of the thermostove can be hazardous to the safety
of the operator and relieves the manufacturer from any civil
or criminal liability. Use only original spare parts. Replace
a worn before failure promotes the prevention of injuries
resulting from accidents caused by the sudden failure of the
components.
the
following
After
1300
tion
of
the
pear on the lower display the
word
"SER V",
please
Authorized Service Center for cleaning and
routine maintenance.
hours
of
opera-
heater
will
ap-
contact
your
Hide quick links:
Advertisement
Table of Contents
