Safety Instructions For Installation - Miele CS 7611 Operating And Installation Instructions

Fit the wall units and cooker hood before fitting the SmartLine element to avoid
damaging it.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The SmartLine element must not be installed over a fridge, fridge-
freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.

This SmartLine element must not be installed above ovens or
cookers unless these have a built-in cooling down fan.

After installation, the mains connection cable of the SmartLine
element must not come into contact with any moving kitchen com-
ponent (e.g. a drawer) or be subject to mechanical loads which could
damage it.

Observe carefully the safety clearances listed on the following
pages.

Safety instructions for installation

45