Miele CS 7611 Operating And Installation Instructions page 42

Problem solving guide
Problem
The sensor controls
show increased sensit-
ivity or fail to react.
 flashes alternately
with  in the timer dis-
play and a tone will
sound.
1 and a number, e.g. 1-0
flashes alternately with
a 3 digit number in the
timer display.
42
Cause and remedy
The sensitivity level of the sensor controls has
changed.
 Make sure that there is no direct light (from the sun
or from an artificial source) falling onto the Smart-
Line element. The area surrounding the SmartLine
element must not be too dark.
 Take any pans off the SmartLine element and wipe
away any food deposits.
Ensure that there is nothing covering the entire
SmartLine element unit or sensor controls.
 Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
 If the problem persists after power has been re-
stored, please contact Miele Service.
The SmartLine element is connected incorrectly.
 Disconnect the SmartLine element from the mains.
 Contact Miele Service.
Cooking zone fault
 Interrupt the power supply to the SmartLine ele-
ment for approx. 1 minute.
 If the problem persists after power has been re-
stored, please contact Miele Service.