Induction - Miele CS 7611 Operating And Installation Instructions

Induction

How it works
An induction coil is located under the
wok basin. When the wok is switched
on, this coil creates a magnetic field
which impacts directly on the base of
the pan and heats it up. The wok basin
itself is heated up indirectly by the heat
given off by the wok pan.
Induction heating only works when the
wok pan supplied is used.
The set power level flashes in the nu-
merical keybank
– if the wok is switched on without the
wok pan in place,
– if the wok pan is removed from the
appliance whilst it is switched on.
If the wok pan is placed on the cooking
zone within 3 minutes, the flashing
power level will go out and you can
continue as normal.
If the wok pan is not replaced, the wok
will switch itself off automatically after
3 minutes.
20

When the wok is switched on
either deliberately or by mistake, or
when there is residual heat present,
there is the risk of any metal items
left on the wok heating up.
Danger of burning.
Do not use the wok as a resting
place for anything else. Switch the
wok off after use with the appropriate
sensor control.