Programming - Miele CS 7611 Operating And Installation Instructions

You can adapt the programming of the
SmartLine element to your personal
needs. Several settings can be altered
in succession.
After accessing the programming
mode, the  symbol and  will appear
in the timer display. After a few seconds
: (programme 01) will flash altern-
ately with : (code) in the timer dis-
play.
Changing the programming
Calling up programming
 With the SmartLine element
switched off, press and hold the 
and  sensor controls together until
the  symbol lights up and  is
shown in the timer display.
Setting the programme
For a two-digit programme number
you need to first set the tens position.
 Touch the  sensor control re-
peatedly until the programme number
you want appears in the display, or
touch the appropriate number on the
numerical keybank.
Setting the code
 Touch the  sensor control re-
peatedly until the code number you
want appears in the display, or touch
the appropriate number on the nu-
merical keybank.
Saving the settings
 While the programme is showing in
the display (e.g. :) touch the 
sensor control until the indicators go
out.
To avoid saving the settings
 Touch the  sensor control until the
indicators go out.

Programming

35