Scanning Film; Restoring Color - Microtek ScanMaker s460 Start Here Manual

Using the LightLid 35 Plus II (cont.)

Scanning Film

1. Launch ScanWizard 5. In the Standard
Control Panel, click the Original button.
Choose "Negative Film" to scan
negatives, or choose "Positive Film" to
scan slides.
2. Click the Preview button in the
Standard Control Panel to perform a
preliminary scan of the image.
3. Click the Scan to button to scan the
image.
After the scan, the scanned image can
be saved as a file, opened in an image-
editing program, sent to a printer,
attached in an e-mail, or saved in a PDF
format.

Restoring Color

ColoRescue™ is an automatic color recovery system that restores faded
color in both photos and film to their original luster.
To use ColoRescue:
1. Launch ScanWizard 5. When the
Standard Control Panel appears, click
the Switch icon on the upper right
corner to switch to the Advanced
Control Panel.
2. In the ScanWizard Settings window,
check the "Automatic Color
Restoration" check box. The next time
you scan faded photos or film,
ColoRescue will restore the faded
colors to their original brilliance.
6
Select Automatic
Color Restoration