Scanning Film - Microtek ScanMaker i800 Plus Start Here Manual

Scanning Film

1. Place the film.
To scan film, use the film holder. Refer to "Using the TMA" in this guide for more details.
2. Launch ScanWizard EZ.
Follow the step 2 in "Scanning Photos" on previous page to launch ScanWizard EZ.
3. Swtich to ScanWizard EZ - Professional Mode.
Click the Professional Mode button on the control panel of the EZ Mode to switch to the
Professional Mode.
4. In the Preview window of the Professional Mode, click the Scan Material button to choose
Negative Film for negatives; choose Positive Film for transparencies and slides, depending on the
film type you are using.
5. In the Scan Job Queue window, check the "Multiple Auto-crop for EZ Lock Film Holder" option.
6. Click the Overview button to auto-crop and perform a preliminary scan of the film loaded onto the
scanner.
7. Specify your scanning requirements in the Settings window. Choose the desired image type and
resolution, and adjust the scan frame settings if necessary.
8. Adjust image quality if necessary, using the Advanced Image Correction tools.
9. Click the Scan to button in the Preview window to scan the film.
Settings window
Preview window
6
Press to swtich to
ScanWizard EZ - EZ Mode
Press to swtich to
ScanWizard EZ - Advanced
Mode
Scan Job Queue window