Scanning Positive Film - Microtek ScanMaker i800 Plus Supplement Manual

1. Raise the scanner lid, then load the positive
2. Launch ScanWizard Pro either as a stand-alone by clicking on the program icon, or
3. Go to the Preview window and choose Positive / Positive Film from the Scan
18 ScanMaker i800 Plus Supplement

Scanning Positive Film

film that you wish to scan and place the EZ-
Lock Film Holder on the scanner glass
surface.
Gently lower the scanner lid down onto the
scanner glass bed.
Important: Do not use the Black Mat. For
details on how to use the EZ-Lock Film
Holder and how to place film, see the section
"Positioning Transparent Film" elsewhere in
this document.
by using the File-Import or File-Acquire command from your image-editing
program (such as Adobe Photoshop). Alternatively, you can start ScanWizard Pro
from the Applications folder in your Mac OS X system.
Material menu.
If this is your first time to scan transparent media, you will be prompted to perform
color calibration for your scanner. A Calibration Reminder window appears.
- Click the Skip button to exit the "Calibration Reminder" window. Clicking the
Skip button allows you to use the factory default ICC profile for your scanner.
Note: If your scanner does not include IT8 calibration targets, disregard the
Calibration reminder window whenever it appears, and click the Skip
button always.
- Click the Calibrate button to run the Microtek Scanner ICC Profiler (MSP)
program to perform color calibration and to customize the ICC profile for your
scanner. After finishing with calibration, relaunch ScanWizard Pro.
Remove the
Black Mat
Allows you to specify
how often you wish to
be prompted to calibrate
the scanner. The default
setting is 14 days