Table of Contents
Advertisement
Tractor installation
Control units
Find a suitable place in the tractor's cabin to secure the control units
from movement. Best recommended placement is to the right of the
driver seat. The supplied bracket will fit most tractors. Threaded
mounting holes may be hidden behind front corner cover.
Installation of control unit brackets
The supplied tractor pillar bracket (A) has a hole spacing of 3.9 in.
(100mm) and 4.7 in. (120 mm). Check tractor instructions manual for
information regarding attachment points.
Three tubes (B) are supplied. One, two or all 3 may be used. They can be
bent and shortened. A spacer (C) is also supplied to allow further
attachment possibilities. Find the best solution for your tractor or
vehicle.
Tube (B) plate is staggered so all boxes will line up if correctly oriented.
The recommended setup is to place the spacer (C) between the two
tubes (B) used for the controllers and the 3rd tube (B) as shown in the
picture, so it can be mounted in the bracket (A).
μ
ATTENTION! An extension cable is available as an option if the
Hydraulics control unit is to be placed further away from the EFC
control unit. (Ref. no. 261933)
4 - System setup
4.1
Hide quick links:
Advertisement
Table of Contents
