Front Wheel; Front Brake Disc - Malaguti Blog 126 Service Manual

B l o g B l o g B l o g B l o g B l o g
125 - 160 cc

FRONT WHEEL

• Unscrew the nut (D), holding the wheel pin with a wrench (P).
• Extract the wheel pin (P)
paying attention not to
damage the spacers
(B - B1), the odometer
unit (A) and the washer (R).
• Remove the wheel pin (P).
• Take off the wheel.
Do not use the brake
lever, with the wheel
removed.
D
53 ± 10%
F. 120
F. 118
P
R
A
B
1
D
V
5
B
D
54 03/09
A
F. 119

FRONT BRAKE DISC

• When removing the front wheel, check the condi-
tion of the brake disc. In case of deep scoring or if
the thickness is below the minimum limit of 3.5 mm,
remove it by unscrewing the screws (V5) and repla-
ce it.
V
5
11 ± 10%
Apply Loctite threadlocker (Strong type) on
the screw threading.
P