B l o g
B l o g
B l o g
B l o g
B l o g
125 - 160 cc
CHECK FRONT/BACK BRAKE PADS AND DISKS
• Check the condition of front and back brake pads and discs
every 2,000 Km.
• Carry out a visual check on the thickness of the brake pads as
shown in the illustration. The minimum thickness of the brake
pad friction material must not be less than 2mm.
• Replace the pads if they are close to the allowed limit, or if they
are damaged.
REPLACING PADS
The procedures for replacing front and back brake pads
can be deduced from the illustration shown below.
(M/N table bill of materials).
FRONT BRAKE
F. 20
F. 17
F. 19
17
03/09
F. 18
To remove back brake pads, see Rear brake caliper
removal (page 61).
REAR BRAKE
F. 21