Setting Data Entry; Supplementary Setting Data Input - SMC Networks LECP6 Series Supplementary Operation Manual

5. Setting Data Entry

Step data changes
Step data is the actual data relating to the operation of the electric actuator.
There are 32 patterns of step data. Each of them has 1 item to be set.
Each step data will become effective as soon as it is written to the controller.
Example) Step data of the controller setting kit [Normal mode]
Speed Position
No. Move
mm/s
0 Absolute 100 20.00
1 Absolute 50 10.00
63 Absolute 20

6. Supplementary setting data input

Supplementary operation parameter details
Activation: "XX" = Become effective just after recorded into the controller
"X" = Become effective after restarting the controller
"－"= The parameter cannot be changed (fixed value)
Parameter name
Basic parameter
The same range as "max.
JOG speed
speed"
Basic parameter
The same range as "max.
JOG acceleration
Acceleration"
Basic parameter
The same range as "max.
JOG deceleration
Acceleration"
Step data
JOG thrust The same range as
"positioning force"
Among the operation parameters, please do not change the parameters other than those described
in (1), motor parameter, basic value parameter and alarm parameter. Malfunction, damage or
burnout might occur.
Accel Decel PushingF
2
mm mm/s 2 mm/s
1000 1000
1000 1000
5.00 500 500
Range
TriggerLV PushingSp
％ ％
mm/s
0 0 0
70 60 5
0 0 0
Description
Sets the speed during jog operation with JOG- /
JOG+ input terminal. (Unit mm/s)
Sets the acceleration when the jog operation
starts with JOG- / JOG+ input terminal. (Unit
2
mm/s )
Sets the deceleration during jog operation stop
with JOG- / JOG+ input terminal. (Unit
Sets the maximum torque during jog operation
with JOG- / JOG+ input terminal. (Unit %)
Caution
- 15 -
Moving F Area1 Area2
％
mm mm
100 18.00 22.50
100 6.0 12.0
100 3.0 8.0
Activa
tion
XX
:
XX
XX
: 2 ）
mm/s
XX
No.JXC※-OMW1019-A
In posn
mm
0.5
1.5
1.2