Cpu And System Fan Connectors (Fan1/2/3); Audio Cd_In Connector (Jp11) (Black); Wireless Keyboard And Mouse Header (Jp6) - Shuttle FB61 User Manual

CPU, System and Chipset Fan Connectors - FAN1/2/3
E2
The mainboard provides three onboard 12V cooling fan power connectors
to support CPU (FAN1), System (FAN2) or Chipset (FAN3) cooling fans.
GND
1
Note:
Both cable wiring and type of plug may vary
, which depends on the fan maker. Keep in
mind that the red wire should always be
connected to the +12V header and the black
wire to the ground (GND) header.

Audio CD_IN Connector (JP11) (Black)

E3
Port JP11 is used to attach an audio connector cable from the CD-ROM drive.
CD_IN Left
Wireless Keyboard and Mouse Connector (JP6)
E4
Port JP6 can be used to connect wireless keyboard and mouse device.
Pin Assignments:
1=VCC
3=GND
5=MSCLK
7=MSDATA
9=KBCLK
11=KBDATA 12=KB_DT
+12V
SENSE
1 2 3 4
CD_IN Right
GND
11 9 7 5 3 1
12 10 8 6 4 2
2=VCC
4=KEY
6=MS_CK
8=MS_DK
10=KB_CK
- 35 -
CD-IN
1
JP11
Wireless KB/MS
1
JP6
FAN1
1
FAN3
1
FAN2
1