Table of Contents
Advertisement
Onboard Parallel Port
This item allows you to determine onboard parallel port controller I/O
address and interrupt request ( IRQ ).
Ø The choice:: 378/IRQ7, 278/IRQ5, 3BC/IRQ7 or Disabled.
Parallel Port Mode
Select an operating mode for the onboard parallel (printer)
port. Select Normal, Compatible, or SPP unless you are certain your
hardware and software both support one of the other available modes.
Ø The choice: SPP, EPP, ECP or ECP+EPP.
ECP Mode Use DMA
When the onboard parallel is set to ECP mode, the parallel port can use
DMA3 or DMA1.
Ø The choice: 1 or 3.
Onboard LAN Boot ROM
Decide whether to invoke the boot ROM of the onboard LAN chip.
Ø The choice: Enabled or Disabled.
- 62 -
Hide quick links:
Advertisement
Table of Contents
