Clear Cmos Setting (Jp1) - Shuttle FB61 User Manual

JP8
E5
JP7
E6
JP3
E7
USB4 / USB5
E8
F
Jumpers
A1

Clear CMOS Setting (JP1)

JP1 is used to clear CMOS data. Clearing CMOS will result in the perma-
nently erasing previous system configuration settings and the restoring origi-
nal (factory-set) system settings.
Step 1. Turn off the system power (PC-> Off).
Step 2. Remove ATX Power cable from ATX Power connector.
Step 3. Remove jumper cap from JP1 pins 1-2.
Step 4. Place the jumper cap on JP1 pin 2-3 for a few seconds.
Step 5. Return the jumper cap to pin 1-2.
Step 6. Plug ATX Power cable into ATX Power connector.
Step 7. Turn on the system power (PC-> On).
: Ext. Print Port
: IR Header
: SPDIF In/Out Port
: USB Headers
Pin 1-2 (Default)
1
Pin 2-3 (Clear CMOS)
1
Clear CMOS
1
- 27 -
JP1