Shuttle FB61 User Manual page 54

Limit CPUID MaxVal
This item allows you to set CPUID MaxVal to 3, should be "Disabled" for
WinXp.
Ø The Choice: Enabled or Disabled.
Note: If CPU supports thermal 2 function, the item appear.
Hard Disk Boot Priority
This item allows you to select Hard Disk Boot Device Priority.
Bios Write Protect
This item allows you to enable or disable the Bios Write Protect. If you
want to flash BIOS, you must set it Disabled.
Ø The choice: Enabled or Disabled.
Virus Warning
Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot
sector protection. If this function is enables and someone attempts to write
data into this area, BIOS will show a warning message on screen, and an
alarm beep.
Enabled Activates automatically when the system boots up,
causing a warning message to appear when anything
attempts to access the boot sector or hard disk
partition table.
Disabled No warning message will appear when anything
attempts to access the boot sector or hard disk
partition table.
Ø The choice: Enabled or Disabled.
CPU L1&L2&L3 Cache
All processors that can be installed in this mainboard use internal level1(L1)
, external 2(L2) cache memory and (L3) to imporve performance.
Leave this item at the default value for better performance.
Ø The choice: Enabled or Disabled.
Note: If CPU supports, L3 item appear.
Hyper-Threading Technology
The latest Intel application defines a high-speed calculating ability to
optimize your system by two CUPs supported(one virtual, one physical)
in a multi-task environment.
Ø The choice: Enabled or Disabled.
- 50 -