Step 6 Connect Front Panel Switches/Leds/Usb/1394A/Mic/Line-In/Line-Out - Shuttle FB61 User Manual

Step 6
Connect Front Panel Switches/LEDs
You can find there are several different cables already existing in the system
case and originatinting from the computer's front-panel devices (HDD LED,
Power LED or Reset Switch devices etc.) These cables serve to connect the
front-panel switches and LEDs connectors to the mainboard's front-panel
connectors group, as shown below.
Front Panel-JP13
PWON
1
GLED
3
PLED 1
1. ATX Soft Power On/Off (PWON)
2. HDD-LED (HLED)
3. Green-LED and Power-LED (GLED/PLED)
4. Hardware Reset Switch Button (RST)
Connect Front Panel USB/MIC/Line-out/Line-in/1394
You can find there are several different cables already existing in the system
case and originatinting from the computer's front-panel devices (HDLED,
GLED, USB4/5, MIC Line-in or Line-out devices etc.) These cables serve to
connect the HDLED, GLED, USB4/5, MIC, Line-in, Line-out or 1394 connec-
tors to the mainboard's front-panel connectors group, as shown below.
Front Panel-JP16
5
49
50
RST
4
HLED
2
- 16 -
Front Panel
1
JP13
1
Front Panel
JP16
2