Parallel Port Header-Ext. Print Port (Jp8); Ir Header (Jp7) - Shuttle FB61 User Manual

E5

Parallel Port Header-EXT. Print Port (JP8)

One DB25 male parallel port header is located at the rear panel of the maiboard.
The header is used to connect the cable attached to parallel connector. But the
parallel cable and connector os optional at the time of purchase.
Pin Assignment:
1=PSTB
4=PD2
7=PD5
10=P_-ACK
13=P_SLCT
16=P_-INIT
19=GND
22=GND
25=GND

IR Header (JP7)

E6
If you have an infrared device, this mainboard can implement IR tranfer func-
tion. To enable the IR transfer function, follow these steps:
6
5
4
3
2
1
Pin Assignments:
1=NC
3=VCC
5=IrTx
Note: Before connect your IR device, please be sure each IR on board pin
allocation is matchable with the pin of the IR device. Other wise,
incorrect IR connection may do damage to your IR device.
Step1: Attach the 6-pin infrared device cable to JP7.
(Refer to the above diagram for IR pin assignment.)
Step2: This mainboard support IrDA or Normal transfer modes.
2=PD0
3=PD1
5=PD3
6=PD4
8=PD6 9=PD7
11=P_BUSY 12=P_PE
14=P_-AFD
15=P_-ERR
17=P_-SLIN
18=GND
20=GND 21=GND
23=GND 24=GND
26=KEY
2=KEY
4=GND
6=IrRx
- 36 -
EXT. Print
1
JP8
IR Header
1
JP7