Shuttle FB61 User Manual page 59

AGP Aperture Size(MB)
This item defines the size of the aperture if you use an AGP graphics
adapter. The AGP aperture refers to section of the PCI memory address
range used for graphics memory. We recommend that you leave this item
at the default value.
Ø The Choice: 4, 8, 16, 32, 64, 128 or 256.
Init Display First
This item allows you to decide to activate whether PCI slot or AGP first.
Ø The choice: PCI Slot or Onboard /AGP .
********** On -Chip VGA Setting **********
On-Chip VGA
This item allows you to enable or disable On-Chip AGP.
Ø The Choice: Enabled or Disabled.
On-Chip Frame Buffer Size
This item allows you to set the onboard VGA share memory size.
Ø The Choice: 1MB, 8MB or 16MB.
Boot Display
If you plug CV21 add card, you can select boot display device as CRT/
TV/TFT(DVI). If you don't plug CV21, the item will be hidden.
Ø The Choice: Auto, CRT, EFP, TV, CRT+EFD or CRT+TV.
TV Standard for Windows
If you plug CV21 add card and display device is TV, you can select TV
mode for Windows. If you don't plug CV21, the item will be hidden.
Ø The Choice: NTSC or PAL.
TV Format for DOS
If you plug CV21 add card and display device is TV, you can select TV
mode for DOS. If you don't plug CV21, the item will be hidden.
Ø The Choice: NTSC_M, NTSC_M_J, NTSC_N, PAL_B, PAL_G,
PAL_D, PAL_H, PAL_I, PAL_M or PAL_N.
Turbo Mode
This item allows you to set Turbo Mode.
Auto To allow user enable "Turbo Mode" with 533 MHz FSB
only.
Manual To allow user enable "Turbo Mode" with 533/800 MHz FSB.
Ø The Choice: Auto or Enabled.
- 55 -