Table of Contents
Advertisement
System Manual
2.2
Hoisting and Transportation
Risk of personal injury or device damage due to incorrect operation!
•
Follow the procedure of work of heights when walking on the top of the product.
•
All hoisting and transportation must comply with the relevant codes and regula-
tions of the nation/region where the project is located.
All equipment and tools used during operation must have been regularly
maintained.
Improper hoisting may cause personal injury!
•
It is strictly prohibited to stand within 5m - 10m outside the operating area (i.e.,
under the boom and the hoisted machine) to avoid casualties.
•
The product must be hoisted and moved by professional personnel. Before the
operation, be sure to wear personal protective equipment.
•
Stop hoisting in the event of severe weather, such as heavy rain, thick fog, or
strong wind.
•
When hoisting and moving the product, be aware of its size and weight and
keep the balance to prevent it from turning over or falling.
2.3
Electrical Connection
Before electrical connections, please make sure that the product is not damaged.
Otherwise, it may cause danger!
Before electrical connections, please make sure that the product switch and all
switches connected to the product are set to "OFF", and use measuring equipment
to ensure that there is no voltage at the connection. Otherwise, an electric shock
may occur!
2 Safety Instructions
5
Advertisement
Table of Contents
