Daily Use - Electrolux EOC66800 User Manual

Table of Contents

Advertisement

Available languages

Available languages

6 electrolux
Preheating
1. Set function
ature.
2. Run an empty oven for 45 minutes.
3. Set function
ature.

DAILY USE

Warning! Refer to "Safety information"
chapter.
The display
1
Button
PYROLYTIC CLEANING
/
Touch controls
Touch controls control all the oven func-
tions. Use the touch controls to set combi-
nation of cooking function, cooking temper-
ature and automatic timing .
Make sure you touch just one control at a
time.
To set a cooking function touch and hold.
Setting the oven function
1
and maximum temper-
and maximum temper-
2
3
Function
ON/OFF
SELECTOR
RAPID HEAT UP
PLUS, MINUS
CLOCK
2
4. Run an empty oven for 15 minutes.
This is to burn off any residue from the cavi-
ty surface. Accessories can become more
hot than in normal use. During this period
an odour and smoke can be emitted. This
is normal. Make sure the airflow is sufficient.
1
Cooking function
2
Temperature
3
Time
Description
To switch the appliance on or off.
To set the oven function.
To switch the rapid heat-up function on.
To start the Pyrolytic cleaning.
To adjust the values (temperature and time).
To set the clock function.
1. Touch
again and again until the sym-
bol for the necessary oven function
flashes.
The display shows an automatic tem-
perature. If you do not change the tem-
perature in approximately 5 seconds,
the appliance starts to operate.
2. To change the temperature, touch
button.
If you start an oven function, the sym-
bol of the temperature flashes.
The symbol shows that the tempera-
ture in the appliance increases.
When the appliance is at the set tem-
perature, an acoustic signal sounds
and the symbol of the temperature
stops to flash.
or

Advertisement

Table of Contents
loading

Table of Contents