Clock Functions; Using The Accessories - Electrolux EOC66800 User Manual

8 electrolux
3. When Rapid heat up is completed, an
acoustic signal sounds and "FHU" goes
out.

CLOCK FUNCTIONS

Clock function
Time of day
Minute minder
Duration
End
Duration and End
the same time, if the oven is to be
switched on and off automatically later.
In this case first set Duration
End .
Setting the clock functions
1. Set an oven function and a temperature
(not necessary for the Minute Minder).
Refer to "Setting the oven function".
2. Touch
again and again until the sym-
bol for the necessary clock function
flashes.

USING THE ACCESSORIES

Warning! Refer to "Safety information"
chapter.
Telescopic runners
Installing telescopic runners
You can put the telescopic runners on each
level.
Make sure that the two telescopic runners
are on the same level.
The stop element that is at one end of the
telescopic runner must point up.
Shows the time. To set, change or check the time.
To set a countdown time.
A signal sounds, after the time period is completed.
This function has no effect on the operation of the oven.
To set how long the oven has to be in operation.
To set the switch-off time for an oven function.
can be used at
, then
1
2
At this time the appliance continues to
heat in the set oven function and oven
temperature.
4. Put the food in the oven.
Application
3. To set the time for Minute minder
Duration or End
button.
The related clock function symbol
comes on.
When the time period is completed, the
symbol for the clock function flashes
and an acoustic signal sounds for 2 mi-
nutes. Touch any sensor field to stop
the acoustic signal.
With the functions Duration
the appliance stops automatically.
4. Touch
to deactivate the appliance.
Cancelling the clock functions
1. Touch
again and again until the sym-
bol for the necessary clock function and
flashes.
2. Touch "
" again and again until the
time is "00:00".
,
, touch or
and End