Step 1: Unpack, Inspect, And Verify Shipment; Unpack And Inspect The Modules; Esd - Keysight Technologies M9393A Startup Manual

Step 1: Unpack, Inspect, and Verify Shipment

Unpack and Inspect the Modules

ESD

Electrostatic discharge (ESD) can damage or destroy electronic components. Use a
static-safe work station to perform all work on electronic assemblies. The figure
(left) shows a static-safe work station using two types of ESD protection: conductive
table-mat and wrist-strap combination, and conductive floor-mat and heel-strap
combination. Both types, when used together, provide a significant level of ESD
protection. Of the two, only the table-mat and wrist-strap combination provides
adequate ESD protection when used alone. To ensure user safety, the static-safe
accessories must provide at least 1 MΩ of isolation from ground.
Keysight M9393A PXIe Performance Vector Signal Analyzer
The modules are shipped in materials which prevent damage from static.
The module should only be removed from the packaging in an anti-static
area ensuring that correct anti-static precautions are taken. Store all
modules in anti-static envelopes when not in use.
DO NOT use these techniques for a static-safe work station when working
on circuitry with a voltage potential greater than 500 volts.
15