Keysight Technologies M981 AS Series Quick Start Manual

M981xAS PXI Vector
Component Analyzer
Please use ESD Precautions when handling and operating

System Requirements

Description
Operating system
Processor speed
Available memory
Available disk space
Display resolution
Must install IO Libraries Suite 2018 Update 1 or greater.
a.

Hardware Requirements

Description Requirements
Chassis PXIe or PXI-H chassis slot
Embedded Controller Keysight M903xA or an equivalent embedded controller that meets the following
requirements:

Installation Procedure

1. Install the embedded controller module into a compatible chassis. Keysight PXIe chassis is recommended.
See the https://www.keysight.com/find/pxi-chassis.
2. Connect peripherals (mouse, keyboard, monitor) and power up the chassis.
3. Install the Keysight IO Libraries Suite from https://www.keysight.com/find/iosuite. Follow the installer
prompts.
4. Download the network analyzer software from
the Drivers, Firmware & Software tab.
Requirements
Windows 7 SP1 or Windows 10 (64 bit)
Intel i5 6 Generation or newer/ Intel Xeon E3 v3 or newer
th
4 GB minimum
2 GB available drive space minimum
1024 x 768 minimum
- A PXIe system controller (PXI-1 embedded controllers are not compatible)
- Utilizes a 2x8, 4x4, or 1x8 PXIe system slot link configuration.
- Runs one of the operating systems listed in System Requirements (above)
https://www.keysight.com/support/M9800A
Quick Start Guide
a
webpage, click