Interface; Installing The Postscript Printer Driver For The Usb Interface - Epson EPL-N2550 Series User Manual

9. Follow the on-screen instructions for the rest of the
installation.
10. When installation is done, click Finish.
Installing the PostScript printer driver for the USB

interface

Follow the steps below to install the PostScript printer driver for
the USB interface.
Caution:
c
Never use EPSON Status Monitor when the printer is connected
via a USB port. It may damage the system.
Note:
❏ For Windows Me or 98, if the Windows driver and the Adobe PS
driver for Epson printers with a USB connection have already been
installed on your computer, follow the installation procedure
"Installing the PostScript printer driver for the parallel interface"
on page 129, but make sure to select USB as the port in step 5. If
you have not installed an Epson USB printer driver on your
computer, follow the installation procedure below.
❏ Installing the printer software for Windows XP or 2000 may require
administrator privileges. If you have problems, ask your
administrator for more information.
❏ Turn off all virus protection programs before installing the printer
software.
1. Make sure that the printer is turned off. Insert the printer
software CD-ROM into your CD-ROM drive.
2. Connect your computer to the printer with a USB cable, then
turn on the printer.
3. Install the USB Device Driver.
Using the PostScript Printer Driver
5
5
5
5
5
5
5
5
5
5
5
5
131