GE MDS Mercury Series Reference Manual page 89

05-4446A01, Rev. C
management system. Follow the steps below to proceed with
Modbus/TCP configuration.
1. From the Serial Configuration Wizard opening screen
on Page 81), select
Figure 3-44. Configuration Wizard Opening Screen
2. Choose the IP protocol you wish to use (TCP, UDP, or Mod-
bus/TCP) by selecting the appropriate letter from the menu.
Figure 3-45. IP Protocol Selection Screen
3. On the next screen
port you wish to use for the Modbus/TCP server. The default is port
. Press to continue.
502 N
Mercury Reference Manual
to begin the wizard.
A
Invisible place holder
(Figure 3-46 on Page
(Figure 3-44
82), choose the listening
81