GE MDS Mercury Series Reference Manual page 102

94
Figure 3-60. Redundancy Configuration Menu (AP Only)
•
Redundancy Configuration
ver for AP. [
enabled, disabled; disabled
•
Network Event Triggers
(Figure 3-61 on Page
tus for Network Events.
•
Radio Event Triggers
(Figure 3-62 on Page
tus for Radio Events, such as a loss of associated Remotes or
excessive packet errors.
•
Hardware Event Triggers
(Figure 3-63 on Page
tus for initialization/hardware errors.
•
Redundancy Configuration Options
menu (Figure 3-64 on Page
criteria for declaring an error event.
•
Force Switchover
initiated) switchover to the backup AP. The "challenge ques-
tion"
Are you sure? (y/n)
switchover. To invoke the change, press the letter
the Enter key.
Mercury Reference Manual
Invisible place holder
—Enable/disable redundancy switcho-
]
—This selection opens a submenu
95) where you can set/view the trigger sta-
—This selection opens a submenu
95) where you can set/view the trigger sta-
—This selection opens a submenu
96) where you can set/view the trigger sta-
—This selection opens a sub-
96) where you can set the threshold
—Selecting this option forces a manual (user
is presented to avoid an unintended
followed by
y
05-4446A01, Rev. C