Configuring Network Parameters; Network Configuration Menu - GE MDS Mercury Series Reference Manual

05-4446A01, Rev. C
•
Performance Information
and data layer's performance in the radio network.
(See "PERFORMANCE INFORMATION MENU" on
Page 101)
•
Maintenance/Tools
ing major unit capabilities.
MENU" on Page
3.4 CONFIGURING NETWORK
PARAMETERS

3.4.1 Network Configuration Menu

The Network Configuration Menu is the home of several parameters that
you should review and set as necessary before placing a transceiver into
service.
Figure 3-11. Network Configuration Menu
•
Network Interface Config
set various parameters (VLAN Status, IP Configuration, and
DHCP Server Configuration).
•
Ethernet Port Config
the Ethernet port (enabled or disabled), port follows association,
and Ethernet filtering configuration. Detailed explanations of
this menu are contained in
Page 51.
•
Bridge Configuration
ation.
•
SNMP Agent Config
See "SNMP Agent Configuration" on Page 53
mation.
Mercury Reference Manual
—Status information relating to the radio
—Tools for upgrading firmware code and test-
(See "MAINTENANCE/TOOLS
113)
—Presents a menu where you can view or
—Presents a menu for defining the status of
Ethernet Port Configuration Menu on
—View/set options for Ethernet Bridge oper-
—View/set SNMP configuration parameters.
for more infor-
43