GE MDS Mercury Series Reference Manual page 134

126
•
Test Transmit Power
ting. Make a numerical entry within the allowable range.
[
-30 to +30 dBm
• —Sets/displays the radio's test channel number.
Test Channel
Make a numerical entry within the allowable range.
[ ]
0-13; 0
•
Test RF Bandwidth
testing. Use the Spacebar to view selections.
[
1.75. 3.5 MHz; 1.75 MHz
•
Test Burst Percentage
to use for testing. Make a numerical entry within the allowable
range. [
0-100%; 100
Spectrum Analyzer Menu (Remote Only)
Using this menu, you can enable or disable the remote's spectrum ana-
lyzer mode (Figure 3-99 on Page
plays through the terminal a spectrum analyzer view of its transmit
power and frequency
Figure 3-99. Spectrum Analyzer Menu
Mercury Reference Manual
—Sets/displays the transmitter's power set-
]
—Sets/displays the transmitter's bandwidth for
]
—Sets/displays the percentage of Burst size
]
126). When enabled, the remote dis-
(Figure 3-100 on Page 127).
05-4446A01, Rev. C