GE MDS Mercury Series Reference Manual page 131

05-4446A01, Rev. C
Authorization Codes
Figure 3-95. Authorization Codes Menu
•
Authorization Key
transceiver's non-volatile memory.
•
Authorized Features
tures. Each item shows
tings allowed by the Authorization Key entered into the radio.
Reset to Factory Defaults
Use the
Reset to Factory Defaults
Menu to return all configurable settings to those set at the factory prior
to shipping. Use this selection with caution, as you will lose any custom
settings you have established for your transceiver, and will need to
re-enter them using the menu system.
To prevent accidental use of the command, a "challenge" question is
presented at the bottom of the screen when this choice is selected (see
Figure 3-96 on Page 124). To proceed, enter
then press Enter. (You may also press the Escape key on your keyboard
to exit this command without making any changes.)
Mercury Reference Manual
Invisible place holder
—For entering an Authorization Key into the
—List of the transceiver's authorized fea-
or
enabled disabled
selection on the Maintenance/Tools
y
according to the set-
for yes or for no, and
n
123