Logged Events - GE MDS Mercury Series Reference Manual

142

4.1.6 Logged Events

(See Event Log Menu on Page
The following events allow the transceiver to continue operation and do
not make the LED blink. Each is reported through an SNMP trap.
PWR
The left hand column, Event Log Entry, is what shows in the Event Log.
Table 4-7. Non-Critical Events—Alphabetical Order
Event Log Entry
Association Attempt
Success/Failed
Association Lost - Local IP
Address Changed
Association Lost - Local
Network Name Changed
Association Lost/Established
Auth Demo Mode Expired --
Rebooted Radio/Enabled
Auth Key Entered - Key
Valid/Key Invalid
Console Access Locked for
5 Min
Console User Logged
Out/Logged In
Current AP No Longer
Approved
Decryption Error/Decryption
OK
Ethernet Port
Enabled/Disabled
Ranging Lost/Established
Connecting Lost/Established
HTTP Access Locked for 5 Min
HTTP User Logged
Out/Logged In
Log Cleared
Reprogramming Complete
Reprogramming Failed
Reprogramming Started
Scanning Started
Mercury Reference Manual
104)
Severity Description
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR Self explanatory
MAJOR May occur during the Scanning
process at a Remote. Indicates
that the received beacon came
from an AP which is not in the
"Approved AP" list. This might be
caused by some Remotes hearing
multiple AP's. This event is
expected behavior.
MAJOR A decryption error is logged when
an encryption phrase mismatch
has occurred. A mismatch is
declared after five consecutive
errors over a 40-second window.
When the error has cleared,
DECRYPT OK appears.
INFORM Self explanatory
INFORM Self explanatory
INFORM Self explanatory
MAJOR Self explanatory
MAJOR httpLogin(49)
INFORM Self explanatory
INFORM Self explanatory
MAJOR Self explanatory
INFORM Self explanatory
INFORM Self explanatory
05-4446A01, Rev. C