114
Figure 3-87. Firmware Versions Menu
Figure 3-88. Telnet Utility Menu
•
—The IP address of the target device.
Host Address
•
—Connect to the target device at the host address.
Connect
Reprogramming Menu
The factory sometimes offers upgrades to the transceiver firmware.
Loading new firmware into the unit will not alter any privileges pro-
vided by Authorization Keys and does not require you to take the trans-
ceiver off-line until you want to operate the unit with the newly installed
firmware image.
Firmware images are available free-of-charge at:
www.GEmds.com/Resources/TechnicalSupport/
NOTE: Firmware for AP radios is different than for Remotes, and may
not be interchanged. This was only true for earlier (pre-2.1.0)
firmware.
Mercury Reference Manual
Invisible place holder
05-4446A01, Rev. C