Epilog Laser FusionPro 32 Original Instructions Manual page 9

SECTION 1: SAFETY
3
4
5
6
7
8
9
3. Descriptive Label: This label identifies the classification of the
Model 16000 in accordance with 21 CFR 1040.10 and IEC 60825-1. It is
located on the right side of the machine's cabinet, below the Warning
Logotype.
4. Non-interlocked Protective Housing Safety Labels: These labels
are located on, or adjacent to, removable access covers on the
machine's cabinet as shown in the diagrams to follow. Where a label
is located on a removable cover, there is an additional label under
the cover so that it will be visible when the cover has been removed.
5. Defeatably-interlocked Protective
Housing Safety Labels: There is one
label on each of the machine's cabinet
doors; one on the front door and one
on the top door.
6. Emergency Stop Label: This label is
located below the red Emergency Stop
switch on the top right side of the
machine.
7. Electrical Safety Label: This label is
located on the back of the machine in
the lower left hand corner.
8. Main Breaker Label: This label is
located on or above the power module
panel at the right side of the machine's
cabinet.
9. Aperture Safety Label: This label is
located above the aperture, inside the
cabinet, where laser beams enter the
machine's engraving area.
10. Power Labels: The appropriate label
for the machine is located on or below
the power module panel at the right
side of the machine's cabinet.
11. Fire Warning Label: There are two
labels on top of the machine's cabinet;
one to the left and one to the right of
the top cabinet door.
10
- 5 -
11