Table of Contents
Advertisement
SECTION 1: SAFETY
Safety Features and Regulatory Compliance
Epilog has incorporated specific safety features into the Model 16000 Laser System in order to meet the
requirements of 21 CFR 1040 and the International Standard IEC 60825-1. These safety features include:
•
A safety enclosure (cabinet), which fully encloses the engraving laser and its beam path.
•
Dual redundant interlock systems that turn off the engraving laser when the window is opened.
•
A visible emission indication when the Laser Diode Pointer (Red Dot Pointer) is operating. There is an
LED indicator on the machine's front panel.
21 CFR 1040 and IEC 60825-1 require that certification, identification, and warning labels be placed on laser
products. Reproductions of labels on the Epilog Model 16000 Laser System follow, with their locations
specified:
1.
Certification/Identification Plate: This engraved plate is located on the right side of the machine's
cabinet.
2. Warning Logotype: This label is located on the right side of the machine's cabinet, above the
Certification/Identification plate.
- 4 -
Advertisement
Table of Contents
