Section 1: Safety; Laser Safety; Electrical Safety - Epilog Laser FusionPro 32 Original Instructions Manual

SECTION 1: SAFETY

Laser Safety

The standard reference for laser safety is the American Standard for the Safe Use of Lasers, Z136.1-2000,
developed by the American National Standards Institute (ANSI). This reference is the basis for many of
the federal regulations for laser and laser system manufacturers, and for the Occupational Safety and
Health Administration (OSHA) laser safety guidelines. It contains detailed information concerning proper
installation and use of laser systems.
While the ANSI standard itself does not have the force of law, its recommendations, including warning
signage, training, and the designation of a laser safety officer, may be compulsory under local workplace
regulations when operating laser systems above Class I. It is the operator's responsibility to ensure that
the installation and operation of the Epilog Model 16000 Laser System is performed in accordance with
all applicable laws.
Copies of ANSI Standard Z136.1-2000 are available from Epilog Corporation or from:
Laser Institute of America
12424 Research Parkway, Suite 125
Orlando, FL 32826
(407) 380-1553

Electrical Safety

The AC input power to the Epilog Model 16000 Laser System is potentially lethal and is fully contained
within the cabinet.
• DO NOT open any of the machine's access panels while the unit is plugged in.
Opening a panel may expose the operator to the unit's AC input power.
• DO NOT make or break any electrical connections to the system while the unit is
turned on.
Fusion Pro Electrical Specifications
Model
Pro 32
Pro 32
Pro 32
Pro 48
Pro 48
Wattage(s)
50, 60, 80
50, 60, 80
120
50, 60, 80
120
- 3 -
Voltage Amp draw-MAX
120
240
240
240
240
13A
6.5A
10A
6.5A
10A