Table of Contents
Advertisement
Product Description
4.4
Torque
•
The torque limit values can be adjusted.
•
If the torque is to exceed the upper limit or fall below the lower limit,
the alarm sounds.
LCD
4.5
Program
LCD
•
The Program button is also used to manage the alarm sound.
4.6
Reverse
•
The rotational direction of the file can be changed by this key. It can
also be changed while the file is in motion.
•
The alarm sounds during reverse rotation.
LCD
14/48
The present torque limit value is displayed. The unit is
(Ncm). When it reaches the maximum value, "
displayed.
The present program number is displayed. The program
number is available from 1 to 9.
The mark of the current rotational direction is displayed.
Forward Rotation (F).
Reverse Rotation (R).
B EN XS00 DFU WEB / Rev.08 / 01-2018 (Old ZF 190270.EN)
" is
Advertisement
Table of Contents
