5-14
C
5: F
C
A
M
HAPTER
URTHER
ONFIGURATION
ND
ONITORING
Changing Telnet Characteristics
Select CONFIGURATION from the Main Menu. Select NETWORK
PROTOCOL from the Configuration menu. Select TELNET from
the Network Protocol menu.
The Telnet Protocol Settings screen appears, as shown in
Figure
5-11. You use this screen for changing operational characteristics
of the bridge's Telnet software. Telnet allows users to log into
remote devices from the bridge.
Figure 5-11 Telnet Protocol Settings
Telnet Port: Text Field. Lets you reassign the Telnet port number
to a value other than the default value of 23 . This shouldn't
normally need to be changed.
Changes to this field are only saved during a bridge reset, and
take effect from then on.
DUA1860-0AAA01
Need help?
Do you have a question about the LinkBuilder MSH and is the answer not in the manual?