Setting Up A Host-To-Port Filter Set - 3Com LinkBuilder MSH User Manual

Setting Up A Host-to-Port Filter Set

Select HOST-TO-PORT from the Bridge Filters menu.
The Host-to-Port screen appears, as shown in
this screen for setting up a port's host-to-port filter set. The
screen displays the hosts included in the filter set of the port
denoted in the PORT NAME field. Simply alter this field to work
on a different filter set. There are four host-to-port filter sets, one
for each port.
Enter all hosts that belong to the set.
For host-to-port filtering information, refer to
1-23.
Figure 3-4 Host-to-Port
Port Name: Text Field. Enter the name of the port who's filter set
you want to set up. Use 1 , 2 , 3 or E . Press [Return] to accept the
port name.
Set Name: Text Field. This is optional. Enter a name for the filter
set. The set name helps you identify the set. For example, you
may want to name a set finance .
DUA1860-0AAA01
Custom Filter Configuration
Figure
Filter Sets on page
3-13
3-4. You use