Table of Contents
Advertisement
Page 292 of 378
Enable an indicated ITG card
Enable an indicated ITG port
Display ITG card ID information
Display ITG card status
553-3001-202
Standard 1.00
OA&M using the ITG shell CLI and overlays
To enable a indicated ITG card in LD 32, use the following command:
ENLC l s c
To enable a indicated ITG port in LD 32, use the following command:
ENLU l s c u
To display the ITG card ID in LD 32, use the following command:
IDC l s c
To display the status of a indicated ITG card in LD 32, use the following
command:
STAT l s c
April 2000
Enable the indicated ITG card,
where: l = loop, s = shelf,
c = card
Enable the indicated ITG unit
(port),
where: l = loop, s = shelf,
c = card
Display the card ID for the ITG
card, where: l = loop, s = shelf,
c = card
Display the status of the indicated
ITG card, where: l = loop, s = shelf,
c = card
Advertisement
Table of Contents
