Table of Contents
Advertisement
Figure 36
ITG Dialing Plan - Remote Node Properties window (General tab)
ITG Trunk 2.0 ISDN Signaling Link (ISL)
Install and configure ITG ISL Trunk node
Configure General tab
1
In the IP Telephony Gateway - ISDN IP Trunk Main window, select the
new ITG Trunk node for which you want to build a dialing plan. Select
menu Configuration | Node | Dialing Plan. The ITG Dialing Plan
window appears
2
In the ITG Dialing Plan window, select menu Configuration | Add
remote node. The ITG Dialing Plan - Remote Node Properties window
appears and displays the General tab (see Figure 36.) The default
Node drop-down list reads "Not defined on this MAT PC." and the
Node IP address field is blank. When you click the drop-down list, you
see a list of all the other ITG ISL Trunk nodes configured on this MAT
PC. You do not see the ITG ISL Trunk node for which you are creating
the dialing plan.
3
Select the destination Node to be added from the list. MAT provides
the ITG Trunk Node IP address in a greyed-out box and fills in the
node name in the Node Name field.
Description, Installation and Operation
Page 209 of 378
Advertisement
Table of Contents
