Maintenance
ITG Trunk 2.0 ISDN Signaling Link (ISL)
This chapter describes the maintenance, debug, and software upgrade
procedures available for the ITG card.
This chapter includes the following sections:
•
ITG Trunk 2.0 faceplate maintenance display codes
of the Maintenance codes displayed to the technician on the diagnostic
status of the ITG card.
•
System level maintenance
Meridian 1 overlays, or a MAT PC.
•
ITG shell command set
ITG's card command line interface.
•
ITG card self-tests
ITG card to check correct operation.
•
Upgrades
– explains the different upgrade options available for the ITG
application.
•
Replace an ITG card
an ITG card
•
Backup and restore procedures
data.
•
Fault clearance procedures
to correct them.
– shows how to maintain the ITG card using
– shows how to maintain the ITG card using the
– describes how to perform diagnostic tests on the
– provides step-by-step procedures for replacing
– shows how to backup the application
– describes potential system faults and how
Description, Installation and Operation
Page 295 of 378
– provides a list