To Enable Mcdn Tat; Meridian Customer Defined Network (Mcdn) - Nortel SRG50 Configuration Manual

Survivable remote gateway

Hide thumbs Also See for SRG50:

Table of Contents

Figure 13 Dialing Plan — Private Network panel, Private Network Settings subpanel

MCDN is automatically activated when the system is converted to SRG operation. To ensure that

redirected IP telephones can transfer calls to the SRG local telephones, trunk anti-tromboning

(TAT) must be enabled.

To enable MCDN TAT

Use Element Manager to enable TAT by selecting the TAT checkbox at Configuration >

Telephony > Dialing Plan > Private Network > Dialing Plan - Private Network panel > MCDN

subpanel (see the figure

Chapter 6 Setting up the private VoIP network

Dialing Plan — Private Network panel, MCDN subpanel

on page 70).

SRG50 Configuration Guide

Table of Contents

Bcm50