Table of Contents
Advertisement
Page 222 of 378
Set date and time for the ITG ISL Trunk node
Change the default ITG shell password to maintain access
security
553-3001-202
Standard 1.00
Install and configure ITG ISL Trunk node
Set the date and time on the ITG ISL Trunk node in order to have correct time
and date stamps in Operational Measurement (OM) reports, RADIUS Call
Accounting reports, error messages and error and trace logs.
1
Select the ITG ISL Trunk node for which you want to set date and time
from the list in the upper part of the IP Telephony Gateway - ISDN IP
Trunk Main window.
2
Double-click on Leader 0 from the list in the lower part of the Main
window. The ITG Card Properties Maintenance tab appears.
Click on the Set Node Time button.
3
4
Set the correct date and time.
5
Click OK .
The clock is updated immediately on the Active Leader card (Leader 0
or Leader 1), which in turn updates the other cards in the
ITG ISL Trunk node.
You must change the default user name and password when installing the ITG
Trunk node to maintain access security. The ITG user name and password
protects maintenance port access, Telnet, and FTP access to the ITG card over
the LAN.
1
Select the new ITG Trunk node in the upper part of the IP Telephony
Gateway - ISDN IP Trunk Main window.
2
For each card in the node, right-click on the card and select Telnet to
ITG Card from the right-click menu.
3
The Telnet window appears with the VxWorks prompt:
4
When prompted to login, enter the default username and password as:
VxWorks login: itgadmin
Password: itgadmin
ITG>
April 2000
Advertisement
Table of Contents
