Table of Contents
Advertisement
Chapter 2
Introducing SRG200/400 Release 1.5
The SRG200/400 Release 1.5 is a software application that leverages the BCM 4.0 platform using
the BCM200/400 hardware. It is optimized to provide feature transparency to the main office call
server and to act as a survival remote gateway in a branch office environment.
Creating the SRG200/400 Release 1.5
An SRG200/400 Release 1.5 is created by applying the appropriate SRG keycode to a functional
BCM 4.0 system.
The BCM 4.0 Installation Checklist and Quick Start Guide is provided on the SRG200/400
Release 1.5 Documentation CD that is shipped with your SRG200/400 Release 1.5 system.
Instructions in that guide are referenced in the following procedures. Also, the relevant BCM 4.0
default IP addresses, user names, and passwords are excerpted from that guide and provided for
your reference in
Table 2 BCM 4.0 default IP addresses
Port
LAN 1
LAN 2
Table 3 BCM 4.0 default user names and passwords
Tool
Element Manager
Onbox main web page
(http:// [IP address]
Applying SRG200/400 Release 1.5 keycode
To create an SRG200/400, use Nortel Business Element Manager to activate the SRG keycode on
a BCM 4.0 system.
To enable the SRG200/400 Release 1.5 application
1
Locate the SRG authorization codes supplied with your product.
2
Open Element Manager (see the BCM 4.0 Installation Checklist and Quick Start Guide).
3
With Element Manager, connect to the BCM system that you want to convert to an SRG (see
the BCM 4.0 Installation Checklist and Quick Start Guide).
Table 2
and
Table
3.
IP address
10.10.10.1
10.10.11.1
User ID| User Name
nnadmin
nnadmin
Subnet mask
255.255.255.0
255.255.255.0
Password
PlsChgMe!
PlsChgMe!
SRG200/400 Release 1.5 Configuration Guide
15
Advertisement
Table of Contents
Troubleshooting
