Table of Contents
Advertisement
Appendix A: Cable description and NT8D81BA cable replacement
Page 341 of 378
NTCW84EA DCH PC Card Pigtail cable
The NTCW84EA pigtail cable connects port 0 of the DCH PC Card to the J14
pin header on the motherboard. The cable routes the D-Channel signals to the
backplane and the I/O panel. The PC Card connector is keyed to allow
insertion only in the correct direction. The pin header connector is not keyed.
Be careful to align the connector with the pin header. (See Figure 62 and
Table 61.)
ITG Trunk 2.0 ISDN Signaling Link (ISL)
Description, Installation and Operation
Advertisement
Table of Contents
