General Information; Technical Specifications; Brief Description Of Equipment; Section 1 General Information - FALEX 430 ETR Operation Manual

1: General Information

1.1 Technical Specifications

Machine Footprint (with display up): 22" high × 12" wide × 17" deep (
Machine Weight: approximately 55 pounds (
Recommended Working Space: The Falex 430 ETR requires bench space of 24" wide x 30" deep (
) to comfortably operate the test machine. The table should be reasonably level (
cm x 76 cm
) and should be able to support the test equipment, while being free from any external
per foot
vibrations.
Utilities Requirements: The Falex 430 ETR requires a 4 amp, 100 - 240 Volt, single phase, 50/60-Hertz
power source.
Wiring to test machine should follow federal, state and local wiring codes.
Product Classification: The Falex 430 ETR is a Class 1 laser product.
Note: Removal of any panels is to be done by factory trained personnel. Before removing any
panels, disconnect from power.
Caution: Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.

1.2 Brief Description of Equipment

The Falex 430 ETR test machine is designed to offer consistent, precise, analytical measurement of
ASTM D3241 heater tube deposits. It incorporates a laser light source optical detection system for
measuring the ellipsometric parameters, a tube handling assembly with an automatic alignment
system and computer driven software for analyzing the ellipsometric data for ASTM D3241 heater
tube rating.
The following safety features are incorporated into the machine:
• The laser and all laser paths are fully enclosed in a protective housing designed to prevent
human body exposure from the laser path or collateral radiation by beam or reflection
exposure to laser emissions.
• Wired and software interlocks to prevent operator exposure to laser emissions.
• Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser notice
No. 50.
25 kg )
6
56 cm x 30 cm x 43 cm )
61
1/32 in.