3: Detailed User Interface Features
3.4 Password Levels
The user interface incorporates two (2) levels of passwords, each level enabling additional
functionality above and beyond what is allowed for the typical 'Operator' mode.
Level 1 (Service Mode)
The level 1 password is for factory technicians and authorized personnel use only.
[ ETR ]
(all letters capitalized)
Level 2 (Admin Mode)
The level 2 password is for factory technicians and authorized personnel use only.
[ F1020 ]
(all letters capitalized)
3.5 Display Functionality
The following sections will describe the functionality of each display.
3.5.1 Measurement Display
When the 'Measurement' display button is selected, the 'Measurement' display appears
(figure 3-5). This display contains a 3D graph, numeric data, buttons and enterable fields to
allow the operator to configure, run and manage tests.
approximately 18 minutes to complete. This is also the display that appears on the user
interface when the software application is first booted up (
functionality of the display will be discussed in detail below.
Figure 3-4 – Operator Verification Pop-up
23
A measurement test takes
upon machine power up
). The