Rts Running - Screen Innovations Solo/Pro 2 Installation Instructions Manual

10. If slight wrinkles are present, you may need to
distribute the screen material at the weight bar.
(refer to pg. 37 & 38 for detailed instructions)
Solo/Pro 2 - Installation
24V RTS
RUNNING
Solo/Pro 2 is very easy to operate. The RF remote,
supplied with the screen, controls the deployment and
retraction from up to 30 feet away. Enjoy!
RF controlled projection screens operate at
433.42MHz. Minimize or eliminate any sources of RF
interference and shielding. Any metal, wire, or foliage
can reduce or block the signal - reducing the operating
range of the controls. Other nearby transmitters may
cause interference also.
1. Connect the power supply - Solo/Pro 2 with an RTS
motor is shipped with the remote already paired to
the screen. Plug the power supply into the wall and
plug the connectors together.
2. The screen is ready for operation.
16 Running - 24v RTS 17